INCON–M83 User Manual

Code

Warning Message

Solution

001

Command error

Command error, please see instruction.

002

M95 call sub program loop surpass 8

Sub program is calling sub program, allow no more then 8 level.

003

M97 call sub program loop surpass 8

Same as 002.

004

M98 call sub program loop surpass 8

Same as 002.

005

M95 format error

Program error.

006

M97 command require sub program

M97 lacks sub program number.

007

M98 command need vice program file name

M98 lacks sub program name.

008

This is not a sub program, can't execute M99

Lack main program to execute sub program, please write main program.

009

This place cannot change coordinate plan

Tool compensation cannot change coordinate plan.

011

Can't do compensation here

MDI does not allow tool compensation command.

012

Has not yet execute G28 or G30, cannot execute G29

G29 must have G28 or G30 setting middle point.

013

Tool compensation must be working

Reference tool compensation explaining.

014

Tool compensation has been working

Tool compensation cannot repeat to G41/G42 command.

018

Only G01 can execute the angle chamfering or corner rounding

Can only allow G01 to do angel chamfering or corner rounding.

021

Other tool radius compensation is at work

Cannot repeat G41/G42 within tool radius compensation.

022

Tool length compensation has been working

Tool length compensation cannot repeat G43.

023

Train in tool radius compensation must be G00 or G01

Only allow G00/G01 to train in or train out  tool compensation mode

024

Train out tool radius compensation order must be G00 or G01

Same as 023.

025

Because tool radius compensation does not function G40 can't be done

According to tool radius compensation related instruction.

026

Because tool length compensation does not function G49 can't be done

According to tool length compensation related instruction.

027

Within tool radius compensation or while angle chamfering or corner rounding, third axis motion is not allowed

Angle chamfering, corner rounding or tool radius compensation, not allow third or fourth axis to move.

030

Within tool radius compensation, full circle command cannot be follow by interpolate command

Tool radius compensation, if a single order for full circle cutting command, afterwards must finish tool radius compensation, cannot continue interpolate command.

031

Wrong MDI command

Correct MDI command.

032

Wrong H code

H value range 1~10.

033

Wrong T code

T value surpass tool umber limit.

034

Wrong M code

M value range, please refer to 11.8 Other Commands.

035

Wrong G code

G code error.

036

Because of compensation function is at work, this place cannot change D value

G41/G42 does not allow change tool radius compensation value.

037

Wrong DNC command

While executing DNC program, cannot call sub program. So, don't accept M95/M97/M98/M99.

038

Can cycle must have reference point

Within can cycle, R reference value is missing.

039

Because can cycle not yet completed, cannot cancel

Press F10 to finish execution and automatically cancel can cycle.

040

Because compensation is at work the place cannot has MDI

Within tool radius compensation, if MDI pause, not allowing axis movement command.

045

Tool radius compensation can't execute can cycle

Tool radius compensation does not accept can cycle.

049

Memory not enough

Similar to exception error problem, please provide CNC program to Intek Technology for reference, to find the error.

063

Rigid tapping require S code

Rigid tapping must instruct S code.

064

Rigid  tapping S value too big

S value must be reasonable size.

065

Max rigid tapping spindle speed is 0, so, executing tapping cannot

S value must be reasonable size.

066

Wrong D code

D value must be between 1~10.

082

The tool radius compensation, missing next section command

Reference tool radius note item.

083

Command certain number sign must be positive

Check the order.

084

Wrong can cycle command

Check the cycle order.

103

Hard disk error

Check hard drive.

137

File "M83PARA.XML" does not exist

Please make sure M83PARA.XML exist in the USB disk.

138

M83XXXX.UPD file not found

Please make sure M83XXXX.UPD exist in the USB disk.

139

Error #139

Cannot generate a cutting path with this user defined contour.

Possible reasons:

Too few contour points

Contour is not closed

Self-crossing contour

Tool radius is greater than arc radius in this contour

Tool radius too large. Fail on path generating.

Interference between inner and outer contours.

Interference between inner and outer paths.

140

Warning #140

Generate a cutting path with this user defined contour, but have some distortion to the desired shape.

Possible reasons:

Eliminate some shape feature of this contour automatically because the tool radius is too large to reach in the part of contour.

141

Load XML File Error

Some problem with the parameter in M83PARA.XML. Please refer to "7.6.4 Load Parameter" and follow the shown error message to modify the contents in this file.

142

Improper Para #142

Have some problem with the parameters of INSMILL object. Please follow the shown message and modify the corresponding parameters.

143

Object Schedule is empty

Fill in the object schedule and save it again.

499

programdon't exist

Check the program code and file.