INCON–M83 User Manual

Code

Warning Message

Solution

505

Internal error

Program error; please check G codes in the program.

561

When G94 mode execute tapping, corresponding current spindle speed, feed speed too small

Changing rigid tapping program or machine parameter rigid tapping related setting.

575

EtherCAT packet lost

Check EtherCAT cable.

574

System abnormal warning

System error, please provide CNC program to INTEK Technology for reference, to find the error and conduct change.

Out of memory, Divide by zero error, Exception error

Same as 574.

578

Check EtherCAT connection

This alarm occurs when user request servo enable but M83 detects no corresponding servo drive on the EtherCAT connection. Please check if the EtherCAT cable is connected properly and reboot.